IMO (click for Home Page) Product Overview
How to Contact Imo
What's New?
QuickServeSM
More Info/Feedback/Inquiries
About Imo Pump
Technical Articles
Pump TipsTM
Your Order
Home

 

The 4VKC series pump is intended primarily as a medium pressure fluid power pump.   It is available foot or flange mounted.

4VKC

SERIES

Nominal flow rate, GPM/LPM, at 1160 PSI (80 BAR), 185 SSU (40 CST)
SPEED RPM
Size
3500
2900
0320R690
21.7/82.2 16.7/63.2
0400R0560
30.3/115 24.0/90.8
0400R0680
36.2/137 28.5/108
0400R0800
44.1/167 35.1/133
0475R0730
57.8/219 46.1/175
0475R0950
75.2/284 59.9/227
0550R0950
99.5/377
79.1/299
0550R1080
116/438
92.6/350
0600R1060
133/505
106/403
0600R1390
171/646
135/512
0700R1100
195/739
157/594
0700R1400
248/937
199/753


Imo Home Page

Specifications- Series 4VKC

Casing-   High tensile, close grain cast iron.

Rotor Housing-   Aluminum alloy.

Rotors-   Alloy steel hardened.

O-ring-  Buna N.

Seal & Bearing-  Buna N fitted mechanical seal and internal ball bearing

Accessories-   Foot bracket available as a separate item. Completely mounted, built to order pump/driver assemblies are available with baseplates, etc.

Outlet Pressure-   1160 PSIG (80 BAR) maximum.

Inlet Pressure-   29 PSIG (2 BAR) maximum; 7 PSIA (0.5 BAR) minimum.

Viscosity-  36 to 3500 SSU (3 to 760 CST). Hydraulic oils and lube oils can be handled per standard pump ratings.

Temperature-  0 to 175°F (-18 to 80°C).

Drive-  Direct only. 

Rotation-  Clockwise facing pump shaft.

Mounting-   May be foot or flange mounted in any attitude.

Filtration-   74 micron inlet filtration recommended.

Connections-  Inlets and outlets are SAE four bolt flange pads. Taps for the flange bolts are metric- see dimension drawing. Inlet heads are rotatable in 90° increments relative to the discharge port. 

Maximum Speed*-  3600 RPM maximum.

* Assumes minimum inlet pressure requirements are met.

Previous Page     Top Of Page     Site Map     Home

Information on this web site is believed accurate.  However, IMO Pump assumes no obligations or responsibilities for its use outside of contractual agreements.  Corrections and suggestions are solicited.   Webmaster  

© 1998-1999 Imo Pump.  All rights reservedCIG, GTS, Imo, I-Mag, PumpTips, QuickServe and Warren are trade marks of Imo Pump.