Product Overview How to Contact Imo What's New? QuickServeSM More Info/Feedback/Inquiries

About Imo Pump Technical Articles Pump TipsTM Your Order Home

The 4SFC series pump is intended primarily as a medium pressure fluid power pump.   It is available foot or flange mounted.

Imo Home Page

Specifications- Series 4SFC

Casing-   High tensile, close grain cast iron.

Rotor Housing-   Aluminum alloy.

Rotors-   Alloy steel hardened.

O-ring-  Buna N.

Seal & Bearing-  Buna N lip seal and an internal ball bearing.

Accessories-   Foot bracket available as a separate item. Completely mounted, built to order pump/driver assemblies are available with baseplates, etc.

Outlet Pressure-   1450 PSIG (100 BAR) maximum.

Inlet Pressure-   15 PSIG (1 BAR) maximum; 7 PSIA (0.5 BAR) minimum.

Viscosity-  100 to 330 SSU (20 to 75 CST). Hydraulic oils and lube oils can be handled per standard pump ratings.

Temperature-  0 to 160°F (-18 to 71°C).

Drive-  Direct only. 

Rotation-  Clockwise facing pump shaft.

Mounting-   May be foot or flange mounted in any attitude.

Filtration-   74 micron inlet filtration recommended.

Connections-  Inlets and outlets are SAE female straight thread for O-ring straight thread fittings. Inlet heads are rotatable in 180° increments relative to the discharge port. 

Maximum Speed*-  3600 RPM maximum.

* Assumes minimum inlet pressure requirements are met.